We regularly carry out Vacuum Pump and Blower overhauls at our fully-equipped workshop in Doncaster. Our service includes collection from your facility, and the return and set-up of the Vacuum Pump to ensure it is fully operational. This Edwards nXDS6i complete overhaul was completed for a customer in Research & Development who needed a fast […]
Case Studies
Aerzen VML60 Vacuum Pump Major Service
Case Study – Leybold RUVAC WAU1001 Major Service
Our latest major service was on a Leybold RUVAC WAU2001. We collected it from our customer and brought it to our specially equipped workshop in Doncaster to carry out the work.
Case Study – Leybold RUVAC WAU2001 Major Service
Our latest major service was on a Leybold RUVAC WAU2001. We collected it from our customer and brought it to our specially equipped workshop in Doncaster to carry out the work.
Full major overhaul on a Busch RA400 Rotary Vane Pump.
In summer 2021 we carried out a major overhaul on a Busch RA400 Pump for a food manufacturer in Scotland. They were having problems with one of their pumps and called us to assist. We provided them with a free quote, which they found very agreeable, we started on what is a lengthy job that […]
Full major overhaul on a Stokes 212 pump
We are specialists in all Stokes pumps and offer a complete maintenance and repair service. We completed a full major overhaul on a Stokes 212 pump. The work was carried out at our fully-equipped facility in South Yorkshire. We collected the pump and transported it to Doncaster, ready for the overhaul. The job started with […]
Edwards EH4200 Major Service
We recently completed a full major offsite service on an Edwards Vacuum EH4200 Booster Pump for a UK-based provider of speciality metals, alloys and materials. The service involved a complete strip-down of the pump at our Doncaster workshop followed by a thorough aqua blast and dry blast clean. We then replaced the radial shaft seals, pre-conical, conical […]
New Case Study – Aerzen GM4S Major “Offsite” Service
Servicing your vacuum pump or blower will ensure it runs efficiently, keeping costs down and prolonging its life. Our latest major service was an emergency job carried out on an Aerzen GM4S for MBA Polymers in Worksop. The job was completed in our purpose-built workshop in Doncaster. The steps for the job include : The […]
Case Study – Repair and Service Effepizeta Blower
We have recently completed a full repair and service of a seized Effepizeta blower for a customer. We couldn’t test it prior to repair so had to completely strip it down to find out what the problem was. The first job was to remove the main body, which was in good condition and just needed […]
Case Study – Full Service on Aerzen Blowers
We recently carried out full services on 10 Aerzen blowers for a bakery in Stockport. The blowers are used to blow the different flours into the mixers so they are in constant use and require regular maintenance. The work was carried out on-site which was easier than transporting 10 pumps to our facility. The first […]